SAR Kenworth - Fuel Efficiency Project

This SAR Kenworth powered by a Cummins Gen 2 EGR is used for transporting light vehicles Australia wide. Improvements in fuel efficiency were noted 2 weeks after installation and a total of 4% efficiency was achieved. - Read the Case Study here

Kenworth T359 - Fuel Efficiency Project

This Kenworth T359 powered by an ISM 11Lt Euro 5 Diesel Engine with AdBlue is used for transporting light vehicles Australia wide. A total reduction of fuel consumption by 4% was achieved during the 3.5 month project. - Read the Case Study here

Kenworth 2008 T608 - Fuel Efficiency Project

This Kenworth 2008 T608 powered by a Cummins 620Hp is used in a double road train configuration between Perth and Geraldton. Improvements in fuel efficiency were noted 2 weeks after installation and a total of 3.5% ... - Read the Case Study here

Kenworth K200 Heavy Haulage Float - Fuel Efficiency Project

This Kenworth K200 powered by a Cummins diesel engine is for heavy haulage float work Australia wide. Improvements in fuel efficiency were noted 2 weeks after installation and a total of 9.78% efficiency was achieved. - Read the Case Study here

Western Star 4964FX - Fuel Efficiency Project

This Western Star 4964FX transports coal for a mining operation. It has very high fuel consumption due to mountain terrain. Improvements in fuel efficiency were noted 2 weeks after installation and a total of 6.69% efficiency - Read the Case Study here

Volvo FH16 - Fuel Efficiency Project

This Volvo FH16 transports coal for a mining operation. It has very high fuel consumption due to mountain terrain. Improvements in fuel efficiency were noted 2 weeks after installation and a total of 4.89% efficiency - Read the Case Study here

Mack Granite 6x4 Day Cab - Fuel Efficiency Project

This Mack Granite Day Cab is powered by a Mack MP8, 6cyl diesel, 12.8L engine rated at 500hp. This trial returned a total fuel efficiency saving of 11%. - Read the Case Study here

Scania Prime Mover - Fuel Efficiency & Emissions Control

This new Scania prime mover was used to in a trial of fuel efficiency and consumption of SCR additive 'AdBlue'. A fuel saving of 9% was noted during the trial and a 60% reduction in use of AdBlue was achieved. - Read the Case Study here

Scania Prime Mover - Carbon Emissions Reduction & Oil Analysis

Scania Prime Mover (single triaxle) used for local refrigerated produce delivery. DT-80 Emissions Testing showed an improvement in maximum smoke opacity of 57% and an average improvement of 38%. - Read the Case Study here

Scania Bus - Fuel Efficiency Project

This Scania Bus is powered by a 12 Litre 6 cylinder diesel engine. Baseline fuel usage was 35.3 L/100km and the trial showed an overall saving of 10%. - Read the Case Study here

Light Commercial (Mitsubishi FK) - Fuel Efficiency Project

This Mitsubishi Fuso FK is used around suburban and urban areas of South East Queensland. Over the period of the 4 month trial this vehicle returned a total fuel saving of 14%. - Read the Case Study here

Caterpillar D9H Bulldozer - Fuel Efficiency Project

This D9H Caterpillar Bulldozer is powered by a Caterpillar D353, 6Cyl diesel engine and is used for coal train loading for the Acland Coal Mine. Over the trial period, 11% fuel saving was achieved. - Read the Case Study here

Caterpillar 980H Loader - Fuel Efficiency Project

Two Caterpillar 980H Loaders from the Acland Coal Mine were fitted with BFS units. These loaders are used exclusively for coal train loading. The machines showed 10% and 7% fuel saving over the project period. - Read the Case Study here

Light Diesel Vehicle (Nissan Patrol) - Fuel Efficiency Project

The Nissan Patrol has a 4.2Lt Diesel engine and is used as a mobile workshop for heavy diesel vehicle servicing.  The BFS has produced diesel fuel savings of 11.6% in just two months since installation. - Read the Case Study here

Sea Shepherd M.V. Steve Irwin - Fuel Efficiency Project

M.V. Steve Irwin is a vessel in the Sea Shepherd fleet upon which BFS units were installed. Using a return voyage from Fremantle to the Suez Canal as the test scenario the trial showed a 9% fuel efficiency gain. - Read the Case Study here

Light Commercial (Mitsubishi FM) - Fuel Efficiency Project

This Misubishi Fuso FM 10.0 is used around urban and suburban areas of South East Queensland. Over the last three months of the trial this vehicle returned an 8% fuel saving compared to vehicle not fitted with the BFS. - Read the Case Study here

Scania Prime Mover - Fuel Efficiency Trial

This Scania Prime Mover is used for local delivery work hauling loads of approx 42 tonnes. The project showed fuel savings over the nine month period totalling 7% with an approximate saving of $11,000p.a. in diesel costs. - Read the Case Study here

Kenworth Cummins Quad Road Trains - Fuel Efficiency Trial

This Kenworth T650 Prime Mover has a Cummins Signature 525HP engine and is used for coal hauling from the Acland Coal Mine to the Jondaryan Loading Facility. Operational efficiency on this vehicle rose improved by 4%. - Read the Case Study here